The hits in the DomLog.nsf are processed, but no hits are displayed in the Analyzer

If the hits in the DomLog.nsf New Hits view are being moved to the Old Hits view, but little or nothing is appearing in the view in the Analyzer, your problem is most likely caused by improperly set filters. Try disabling all the filters, setting them to Ignore nothing, then reset the Old Hits to unprocessed in the DomLog.nsf and run the Log Analysis agent again. If you get hits in the Analyzer database, then your filters were filtering out the documents that you really wanted to see. Try applying the filters again, paying careful attention to the wording of the filter. For instance, setting a filter to Include Only and leaving the next part blank will essentially include nothing, leaving you with no hits in the Analyzer. Also, double check that the Include \ Ignore is the right way around for what you want to do. You may be ignoring what you really want to include. If you are using more than one type of filtering, try one at a time to make sure that each filter filters the information correctly. Once you are sure that each filter works properly, then combine them.